Bike CO2 Cartridges
XTECH Boost Inflator
4 Cartridges included!
Features:
Fits Presta and Shrader valves without an adaptor
Includes 4x 16g Threaded CO2 Cartridges
Comes with neoprene insulator to prevent frozen hands
Instructions on how to use
Don't want to clutter your bike with a hand pump? Stuck on the side of the road with a flat?? Getting your tyres up to 120psi with a hand pump can be difficult and time consuming... It's time to get with the program. CO2 Air Cartridges are a cheap, lightweight alternative that will save you time, and your arms.
To inflate your tyres follow these simple steps.
1. Use the Neoprene insulator supplied to prevent frozen hands.
2. Thread the Chuck (Head Unit) onto the CO2 Cartridge in a clockwise direction
3. Push the Chuck onto the tyres valve (compatible with either presta or schrader valves)
4. Push down on the Chuck to release the CO2 into the tube.
5. Release the Chuck to stop inflation when desired pressure is reached.
5. Once empty, consider the environment, and recycle the empty cartridges.
CO2 Pressure Chart
Tyre Cartridge Size Pressure
BMX 20" 1x16g 2x20" up to 45psi
MTB 26" 1x16g 1x26" up to 45psi
Road 700c 1x16g 1x700c up to 130psi
Caution: Do not remove CO2 cartridge from the chuck until you are sure the cartridge is completely empty.
CO2 is for emergency use only and should be replaced with air as soon as possible. Do not puncture or heat above 49Degrees as contents are under pressure. Never direct towards any person or animal. Always keep cartridges out of the reach of children. Never leave in any vehicle as explosion may occur due to overheating and can cause injury.
Due to contents being under pressure this item cannot be shipped by air. Please allow for extra delivery time.
Bike CO2 Cartridge X-TECH Boost Inflator w/ 4 Cartridges
